Traxxas E-Revo Owner's Manual download pdf (Page 15)

1/16 E-REVO

•

ESC Proﬁle Selection

The speed control is factory set to Proﬁle #1. To change the proﬁle,

follow the steps on described below. The speed control should be

connected to the receiver and battery, and the transmitter should be

adjusted as described previously. The proﬁles are selected by entering

the programming mode.

ESC Proﬁle Description

Proﬁle #1 (Sport Mode): 100% Forward, 100% Brakes, 100% Reverse

Proﬁle #2 (Race Mode): 100% Forward, 100% Brakes, No Reverse

Proﬁle #3 (Training Mode): 50% Forward, 100% Brakes, 50% Reverse

Selecting Sport Mode (Proﬁle #1)

1. Turn on your transmitter

and connect a fully charged

battery pack to the ESC.

2. With the ESC off, press and

hold the EZ-Set button until

the light turns solid green,

then solid red and then begins

blinking red (indicating the

Proﬁle numbers).

3. When the light blinks red once, release the EZ-Set button.

4. The light will then turn green and the model is ready to drive.

Selecting Race Mode (Proﬁle #2)

1. Turn on your transmitter

and connect a fully charged

battery pack to the ESC.

2. With the ESC off, press and

hold the EZ-Set button until

the light turns solid green,

then solid red and then begins

blinking red (indicating the

Proﬁle numbers).

3. When the light blinks red twice, release the EZ-Set button.

4. The light will then turn green and the model is ready to drive.

Selecting Training Mode* (Proﬁle #3)

1. Turn on your transmitter and

connect a fully charged battery

pack to the ESC.

2. With the ESC off, press and hold

the EZ-Set button until the light

turns solid green, then solid red

and then begins blinking red

(indicating the Proﬁle numbers).

3. When the light blinks red three

times, release the EZ-Set button.

4. The light will then turn green and the model is ready to drive.

Note: If you missed the mode you wanted, keep the EZ-Set button

pressed down and the blink cycle will repeat until a Mode is selected.

ADJUSTING THE ELECTRONIC SPEED CONTROL

*Patent-pending

Patent Pending Training

Mode (Proﬁle #3) reduces

forward and reverse throttle

by 50%. Training Mode

is provided to reduce the

power output allowing

beginning drivers to better

control the model. As driving

skills improve, simply change

to Sport or Race Mode for

full-power operation.

Tip For Fast Mode Changes

The ESC is set to Proﬁle 1

(Sport Mode) as the default.

To quickly change to Proﬁle 3

(Training Mode), with the

transmitter on and the ESC

turned off, press and hold

the SET button until the light

blinks red three times and then

release. For full power, turn off

the ESC then quickly change

back to Proﬁle 1 (Sport

Mode) by pressing and

holding the SET button until

the light blinks red one time

and then releasing.

Green to Red to Off

Release

One blink Red

Solid Green

Green to Red to Off

Release

Two blinks Red

Solid Green

Green to Red to Off

Release

Three blinks Red

Solid Green

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comments to this Manuals

No comments

Traxxas E-Revo Owner's Manual Page 15

Comments to this Manuals

Related products and manuals for Remote controlled toys Traxxas E-Revo